Plastiform LL Needle Tips (38-200mm), compatiable with LL Nozzles*

* LL Nozzles Not included. 

Needle tips are thin needles designed to be clipped onto the ends of Plastiform LL nozzles. They work with very fluid products only. These needle tips offer enhanced precision for applying Plastiform products in hard-to-reach areas, narrow cavities, and complex geometries.

There are 3 sizes of needles, but custom sizes can be requested on demand. Regular sizes are 38mm, 100mm, and 200mm.

Needle tips are specifically made to clip securely onto the LL nozzles. It is not possible to clip these needles to any other nozzle, so be aware when you order them.

Like the LL nozzles, needle tips cannot be cleaned or reused once the Plastiform product has cured inside. The polymerization process permanently hardens the material within the needle’s narrow channel, making removal impossible.

Needle tips are sold separately from LL nozzles and cartridges, allowing you to select the appropriate size for each specific application.

Before attaching the needle tip, ensure your work surface has been properly cleaned with DN1 degreaser and that you have prepared your 50ml cartridge with an LL nozzle securely attached.

Pick the needle size of your liking and clip it onto the end of the LL Nozzle. Be sure it doesn’t move; you should be able to pull on it without it coming off easily.

Once done, be sure the product goes through it. Remember: only very fluid products can be used with these needles, so don’t use products within the Pasty range.

Once your application is finished, throw the needle into regular waste.