TheF30 XL, initially fluid, easily infiltrates into the various orifices of the area to be controlled. The F30 XL is generally used to make large impressions due to its long curing time.
The final plastic copy is flexible (final hardness of 30 Shore A), which allows it to resist the stresses and deformations caused by manual extraction of the impression.
TheF30 XLis recommended for the control of complex internal shapes, however, it should be ensured that the Extraction Stress does not exceed 15%.
The impression offers meticulous results, close to the micrometer and to the dimensions of the original part. All the properties of the part (shape, appearance, dimensions, etc.) are reproduced on the impression.
Reproduction is not damaged during the extraction process, which ensures accurate results. Inside the part, the F30 XL leaves no trace of its passage.
The properties of the F30 XL also allow it to protect or preserve parts, it can also be used as a seal.
As with all high volume products, the F30 XL offers a longer than normal setting time (about 10 minutes). This is also the case for its curing time, more or less at 25 minutes. These longer delays allow users to pour the mixture completely before it stiffens.
Technical Specs
Micron Accuracy
Plastiform F30 XL is accurate to 1 Micron
Complex Internal
Designed to be used in Complex Internal Forms
25 Minutes
Cure time of 25 Mins at 20 Degrees with a working time of 10 Mins
30 Shore A
Final hardness of 30 Shore A, meaning a Flexible Product
Cannot be Sliced
This product is too flexible to be sliced
Large Volume
F30 XL is supplied in 400ml, 1.7L or 10.2L
Fluid
As a fluid product it is ideal for complex internal Bores